Mobile Site Crane-manufacture,factory,supplier from China

A Cantilever Crane with a bridgelike spanning shape installed on  high helps that pass along tracks on the ground. cantilever-kind gantry cranes are used to transfer bulk cargoes, which includes coal and ores, and piece cargoes, consisting of excessive-grade rolled metal.Technical dataMax loading260/500/800kgAir Control parts AIRTACSuction cups2-8pieces Cup MaterialsSiliconeSliding method ManualWeight400/450/480kgArm length4 metersRotation angle AIRTAC  Rotate 90 ° Flip 90° Left and Right,Up and DownColumn height4 metersGas storage function 

Cantilever crane   LJXJ300LJ2520P(500KG) Vacuum glass lifterPneumatic glass handing manipulator is operated by using compressed air. The device does not use electricity and is safe and reliable, easy to operate. It is an essential glass handling tool for a modern glass processing industry. The air flowing through the vacuum generator causes Vacuum Pressure to suck the glass. A cylinder stroke is acted by receiving the command signal from the compressed air in an inlet pipe.

LJXJ300 glass handling lifting cantilever craneThe pneumatic glass handling manipulator is operated by compressed air. Glass sucker crane does not use electricity, safe and reliable, easy to operate. Glass crane is an indispensable tool for glass transport in modern glass processing industry. The air is passed through a vacuum generator to create vacuum pressure and suction glass. Cylinder travel is performed by receiving the command signal from the compressed air intake pipe.

Production Description of the product: The product can load of 600 kg. It is able to be used with out outside electricity deliver. the suction, release and rotation of the suction cup are all managed by remote control. each suction cup has a separate switch which may be used as required, and the suction cup holder has a telescopic rod which can be hooked up or removed as required.

Glass vacuum lifter Glass lifting machine is used to loading and unloading glass for making insulating glass. The glass crane is vertical with arm and column, located in the front or the ending of the IG line and sealing robot. Glass suction crane is one of the vacuum spreaders, which is mainly used in glass production and processing and glass installation on construction site. The best equipment for handling glass is used in glass production and processing, insulating glass, laminated glass, vertical production line and horizontal manual gluing line. It can be used fo

Could Automatically Flip and Suck Curtain Wall Glass Vacuum Glass Lifter for Insulating Glass ProcessProduct DescriptionLJXJ800 Glass Cantilever Crane Loading Lifter EquipmentA pneumatic glass handing manipulator is operated by using compressed air. The device does not use electricity and is safe and reliable, and easy to operate. It is an essential glass handling tool for the modern glass processing industry. The air flowing through the vacuum generator causes Vacuum Pressure to suck the glass.

Glass Cantilever crane for glass loadingProduct DescriptionSpecificationMax.load 300kgRotated angle90°Upright height3400mm or 3900mmQuantity of sucker2 or 4Packing & DeliveryTo better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.Company ProfileJINAN LIJIANG QUTOMATIC EQUIPMENT CO.LTD is an enterprise which integrated product development, designing, sale and service into a whole. The company is located in the beautiful spring city, Jinan.

Designed for used with a crane or other hoisting equipment, the RSY-600-6 lifters employ vacuum to hold a load for lifting, and they provide manual 360°rotation and mechanically assisted, manual 90°tilt movements for load manipulation. Length Maximum 2596mmMinimum 997mmWidth Maximum 1868mmMinimum 821mmPer-Pad 184lbs[100KG]Maximum [800Kg][140KG ]12Volts DC, 10Amps7 amp-hoursStep 1: Use the glass lifter sucker slowly close to the glass, and then the main power switch (⑦) ON, the vacuum pump switch (⑧) ON.

LJCJ02 type insulating glass gas filling machineHollow glass Gas Filling Machine LJCJ02 is a special equipment for hollow glass. The inflator is composed of microcomputer and imported sensor closed-loop control system. The equipment is highly intelligent, the control is accurate, the pneumatic concentration is adjustable, the working efficiency is high, the operation is simple.

Automatic Jumbo Size  Insulating Glass Processing Line with Gas FillingInsulating Glass Unit production line adopts the latest technology, its main purpose is to create high-end quality, to provide customers with the latest production technology, improve production efficiency, save production costs and produce maximum benefits.Details of the Insulating Glass  production line: Main Features• The line has 7 sections:01 transfer section;02 washing machine;03 discharge section;04 inspection and installation section;05 transfer section;06 pressing and filling section;07 discharg

Main featureIt is used for storing the gun when manual glue gun stop work during the process of gluing insulating glassStoring at low temperature，to prevent sealant solidifyApply to polysulfide and siliconeCan be effectively reduced waste when cleaning the glueTechnical dataMax refrigerating temperature70ºCMin heating temperature-40ºCTotal power3.8kwRefrigerating<150minOverall dimension1550*60*1300mm

Description of Glass Sandblasting MachineGlass automatic sandblasting machine control by the PLC, suitable for processing 5-40mm thickness of flat glass to different kind of frosting patterns  . The transmission control by the photo switch and limit switch automatically. Glass conveys by the belt, and the guns driven by chain so that can be move up and down for sandblasting (the distance can be adjusted according to the  requirement). Stable transmission,  high efficiency and easy  maintenance of the chain system.

Automatic hollow glass aluminum spacer bending machineProduct Description Automatic Aluminum Spacer Bar Bending Machine LJZW2020Jinan Lijiang Glass automatic hollow glass aluminum spacer bending machine is a special equipment for the production of hollow glass aluminum frame, replacing the traditional manufacturing process. The automatic aluminum strip bending machine can make a variety of polygonal aluminum frames with one aluminum strip at a time, so as to strengthen the strength of aluminum frames and make the sealing effect of insulating glass better.SpecificationItem.Spec.Max.

PERFORMANCEPLC control system, touch screen interfaceVariable Frequency control systemArc frame coating structureImported pneumatic and hydraulic supercharging systemAutomatic centering and clamping structureAdopt five steps to control conveyPreheating function,glue cylinder limit function,alarm systemPARAMETERSqueeze pressure 10-18MPaTemperature 110〜140°CAluminum spacer width 5.5-26.5mmSpeed0-40m/minDiameter of butyl cylinder 200mmAir supply Flow 0.4m3/minAir pressure > 0.6MPaVoltage 380V 5KW 50HzDimension 3000*700*1200mmWeight650kg

LJTB01 Automatic Butyl Extruder Machine 1. Touch-screen operation, simple and practical2. Auto-measure the width of spacer, nozzle automatic positioning3. Auto-centering and auto-clamping4. The bigger wheel help to coat the arc frame 5. Coating nuzzle is Teflon brand ,non-stick coating6. The coating speed is up to 47m/min,saving materials up to 30％,( 5g/m)7 butyl glue machine beam height is easy to adjust, can adjust the butyl height8. The switch can simultaneously control the opening and closing of both sides of the nozzle9.

Hot Melt Adhesive Insulating Glass Production Line Beam Tape Coating Equipment Butyl Extruder Tape Coating MachineProduct DescriptionJinan LIJIANG Glass  Butyl Extruder Machine LJTB01Lijiang Glass automatic butyl extruder is used for uniform spraying of aluminum spacer frame with hot melt butyl. Butyl extruder type LJTB01 adopts large electric control panel for more convenient operation. The transmission of aluminum frame is controlled by frequency converter, the speed can be adjusted from 0m/min to 47m/min, which is the fastest speed in China.

PERFORMANCE of spacer bending machine• Aluminum bar bending machine adopts servo control feeding system, adjustable size of spacer frame, accuracy up to 0.1mm /m• Aluminum bar bending machine adopts CNC bending Angle control system with adjustable accuracy of 0.1°• Four groups of spacer storage units can be configured for the aluminum bar bender• Aluminum bar bending machine has a variety of sizes of aluminum bar to choose from• The aluminum bar bending machine can automatically adjust the bending speed according to the size of the aluminum frame to avoid the deformation of the large frame and

PERFORMANCE of Butyl Extruder MachineStudy on performance of butyl extruder• Butyl rubber extruder coating speed up to 47 m/min• Save glue compared to ordinary machines.

  Automatic Glass Washing MachineGeneral description of Automatic Glass Washing MachineAutomatic Glass Washing Machine consists of in-feed, prewash, washing&drying, out-feed section. To make good washing performance and quick air dry, it adopts 3 pairs brushes and 2 pairs air knives with 1pc air blower. It fits for tempered glass, solar glass, laminated glass, Low-e glass or any other flat glass processing.  Parameter of Glass Washing MachineParameterMax. Width: 2000mmMin.

PERFORMANCEUse cylinder to provide powerThe famous sealant gun in China, stainless steel mixerHigh pressure protect deviceAnti-back flow control structureMixed rate detector can control the rate of two kinds of gluePARAMETERWorking air pressure>0.6MPaSealant spreading pressure15-20MPaSealant volume4L/minDiameter of A/B sealant570mm/280mmMixed rate6:1-14:1Air supplyFlow 0.8m3/minAir pressure>0.8MPaOverall dimension1700*1260*1900mmWeight600 kg

• Imported motor system to improve equipment efficiency• Imported sealant gun,stainless steel mixer• High pressure protect device• Anti-back flow control structure• Mixed rate detector can control the rate of two kinds of glueWorking air pressure0.3-0.6MPaSealant spreading pressure15-20MPaSealant volume4L/minDiameter of A/B sealant 570mm/280mmSealant spreading air pressure ratio50:1Mixed rate6:1-14:1Air supplyFlow 0.8m3/minAir pressure≥0.8MPaOverall dimension1100*950*1630mm

PERFORMANCEImported motor to improve equipment efficiencyImported sealant gun,stainless steel mixerHigh pressure protect deviceAnti-back flow control structureMixed rate detector can control the rate of two kinds of gluePARAMETERWorking air pressure>0.6MPaSealant spreading pressure15-20MPaSealant volume4L/minDiameter of A/B sealant570mm/280mmMixed rate6:1-14:1Air supplyFlow 0.8m3/minAir pressure>0.8MPaOverall dimension1700*1260*1900mmWeight600 kg